How to install a UV disinfection system for domestic sewage treatment equipment?

How to install a UV disinfection system for domestic sewage treatment equipment?

Nowadays, domestic sewage treatment equipment has become one of the indispensable equipment in daily life. Today, we will introduce the method of installing ultraviolet disinfection system on domestic sewage treatment equipment. The function and performance of ultraviolet disinfection system: The effluent from the sedimentation tank still contains bacteria. Drug disinfection will cause secondary pollution, and using ultraviolet disinfection is a significant improvement, with reliable system disinfection performance and high efficiency. The system consists of ultraviolet lamps, automatic cleaning devices, and automatic control cabinets.

1. Review the reserved holes, embedded parts, and foundation dimensions for civil engineering. Before installation, measure the reserved holes, embedded parts, and foundation dimensions of the UV disinfection system equipment to check if they match the dimensions of the UV disinfection system equipment. If they match, proceed with installation. If they do not match, adjust according to the actual dimensions of the UV disinfection system equipment. The installation position and elevation of the ultraviolet disinfection system equipment should comply with the drawings and technical documents, and the foundation construction should be flat and solid.

2. The installation characteristics of ultraviolet disinfection system: The ultraviolet disinfection system is installed on a concrete foundation and fixed with anchor bolts. Before installation, check the reserved bolt holes on the foundation according to the installation dimensions indicated in the equipment manual. Next, follow the positioning diagram of the UV disinfection system equipment to lay out the foundation and treat the installation surface, which should have a relatively flat installation surface. The foundation treatment adopts the method of chiseling and leveling, and the levelness after treatment is checked using a 0.1/1000 level. 

3. After the basic treatment of the domestic sewage treatment equipment is completed, the ultraviolet disinfection system equipment is lifted and placed in position, and the levelness and elevation of the body are roughly adjusted. If the accuracy does not meet the requirements, a steel pad is used for adjustment. 

The above is the detailed introduction of relevant content by the editor for you. I believe you will have a better understanding after reading it.

(Disclaimer: The article is sourced from the internet and does not represent the views or positions of our website. The copyright belongs to the original author and source. If there is any infringement or objection, please contact us for correction or deletion.)

（声明：文章来源于网络，不代表本站观点及立场，版权归原作者及原出处所有，若有侵权或异议请联系更正或删除。）